| Project |
Client |
Date |
Scope of Work |
Topaz
North Sea |
RWE/Vision Oil & Gas |
2008 |
Provide support for the preparation and review of the
pipeline, diving and linepipe tenders. Provide support
during Tender evaluation of the Pipeline Installation
and Diving and Tie-in contracts. |
Buzzard Field Development
North Sea
|
Nexen/Encana |
2007 |
Review of Saipem detailed pipeline design. Verification
of subsea Wye and Tee forgings using 3D FE methods. Critical
review of six sub-sea structure designs. |
Kelvin Field Development
North Sea
|
ConocoPhillips |
2007 |
Review and verification of Subsea7 Design. Installation
Analysis review and verification. Out-of-straightness
analysis for installed pipeline. |
Saqqara
Egypt |
BP |
2006 |
Review of Detailed Design Documentation. Development
of a Pipeline Management Plan and strategy. |
Cannonball
Trinidad |
BP |
2006 |
Represent BP on repair of a buckled pipeline. |
Mimas and Tethys Field Developments
North Sea
|
ConocoPhillips |
2006 |
Design review and verification.
Installation Analysis review and verification. Out-of-straightness
analysis for installed pipeline. |
HAGP and Devenick
North Sea
|
BP |
2005-2006 |
Supervision and review of detailed design of high temperature
pipeline system, transporting highly corrosive fluids.
Supervision and review of detailed design of Gas Export
Pipeline. |
Saturn and Munro Field Developments
North Sea |
ConocoPhillips |
2004 |
Design supervision/review and verification. Installation
Analysis review and verification. Out-of-straightness
analysis for installed pipeline. |
Rhum Field Development
North Sea |
BP |
2002 |
Supervision of detailed design of high temperature pipeline
system, transporting highly corrosive fluids.
Preparation of CRA lined pipe (mechanically bonded) test
specification and budget, supervision of test, assessment
of results and preparation of installation and operation.
Independent verification of ultimate strength and upheaval
bucking response of reeled PIP system using non-linear
FEA. |
Viscount Field Development
North Sea |
CDS/Conoco |
2002 |
Review of Saipem pipeline and sub-sea structures detailed
design. |
Gulf of Aqaba Pipeline Development
Egypt |
East Gas Company |
2002- |
Client’s Project Manager. Supervision of detailed
pipeline design.
Client’s representative during installation of pipeline
and shore crossing. On-going supervision of annual surveys,
and interpretation of survey data. |
CMS-III Development
North Sea |
Conoco |
2001 |
Design supervision/review and verification. Out-of-straightness
analysis for installed pipeline. |
Corrib Field Development
Ireland |
Stolt Offshore |
2001 |
Independent safety review / HAZID.
Design supervision. Upheaval buckling analysis of flexible
flowline. |
Tangguh Field Development
Indonesia |
BP |
2001 |
Preliminary design and route selection.
Support to BP in the analysis of route data and selection
of optimum route.
Review of DnV design guidelines.
Preparation of CRA lined pipe (mechanically bonded) test
specification and budget, supervision of test, assessment
of results and preparation of installation and operation
limits. Assurance of JPK (Perth) FEED and Saipem Detailed
Design Activities, especially upheaval buckling. |
Ormen Lange
Norwegian Sea
|
BP |
2001 |
Represented BP on Span Technical Committee. |
Jade Field Development
North Sea |
Phillips |
2000-2001 |
Acted as the pipeline engineer for Phillips UK supervising
and assessing pipe-in-pipe design work by JPK and EMC.
Acted as the pipeline engineer for Phillips UK supervising
and assessing the spool design work by APA.
Review and verification of complete Jade pipeline design.
Detailed verification of lateral snaking analysis performed
by JPK and EMC.
Support to PPCo for assessment of operating pipeline and
pipeline protection measures. |
Erskine Replacement Pipeline
North Sea |
Texaco |
2000 |
Verification of the design work being performed by JPK,
EMC and CSOL, plus support to Texaco. Provide specialist
engineering support to JPK on the design of the Erskine
pipeline, including strain based design, limit state design,
upheaval buckling and review of reports from the design
team. Design and supervision of testing and analysis of
CRA lined (metallurgically bonded) riser. |
Keith Bundle
North Sea |
BHP Billiton |
2000 |
Review of documents, assessment of design analysis methods,
support of client at meetings. |
| Back
to top of page |
